High Rev CDI Box Install Guide

Degree of Difficulty: 1

Tools & parts needed: 1) High rev CDI box of your choice

Step 1 Remove the hood. Do this by firmly grasping it on the top and bottom and give it a good tug. It should pop right off.

Step 2  You will see the stock CDI box mounted just behind the headlight. It is not bolted in, it simply slides into a rubber band type holder.

Step 3  You will see two connectors going into the top of it. There are press tabs that hold them onto the CDI box. Push in on the tab and pull the two connectors off. Slide the unit out of the rubber holder.

Step 4  Slide your new CDI box into the holder. Plug in the two connectors. And then reinstall the hood. That is all there is to it.

I know this seems kind of simple but all sponsors are promised an install guide for their parts.

Thanks to the guys at Procom Engineering for supplying the High Rev CDI Box for this project.

This site was developed and maintained by Jeff Poole. Honda, TRX450R, Fourtrax, and all other Honda related terms are property of Honda America Corporation.